What are the advantages of cat litter microwave drying equipment

Granular materials can be dried only by walking on the conveyor belt, and the drying time only takes about 3 minutes. The granular materials are supplied with microwave drying equipment, no rolling friction is required, causing unnecessary damage, and the drying time is short and dry. The temperature is only about 45 degrees, the quality of its retention is quite good, and the ball can be formed in water.

Features of cat litter microwave drying equipment:

1. Fast heating and energy saving: The mechanism of microwave heating is completely different from traditional heating methods (heat conduction, convection, radiation). It makes the heated material itself heat, does not require heat conduction process and the equipment and the air do not absorb heat. The material inside and outside is instantaneous. Reaching the heating temperature, energy saving is more than 2-3 times compared with traditional electric heating and far infrared heating.

2. Heating uniformly and improving product quality: microwave energy penetrates into the material, so that heat energy is generated at the surface and inside of the material at the same time. Selective heating makes the material heating uniformly, and will not produce the phenomenon of external coke and internal growth. As the moisture on the surface of the material evaporates, the temperature of the surface of the material will be slightly lower than the temperature of the inner layer, and the resulting temperature gradient is from the inside to the outside, which is consistent with the migration direction of vapor pressure and heat that accompany the heating process. According to the material drying theory, this heating state is very conducive to material drying.

3. Small thermal inertia, immediate heating and easy control: the energy output by the microwave is immediately absorbed by the material and heated. But for traditional heating, their output energy is absorbed by both the material and the cold furnace body. Micro heating only needs electricity, as long as the microwave power is controlled, immediate heating or termination can be achieved, and there is no preheating process. The application of man-machine interface and PLC can realize the automatic control of the technological process.

4. Small footprint, safety and environmental protection: microwave energy is concentrated and heated quickly, making it occupy a small area. The scientific leakage prevention system makes the microwave leakage strictly controlled within the scope of the national standard, does not produce radioactive hazards, and the whole process does not emit harmful gases, does not produce waste heat and dust pollution.