Matters needing attention in the installation of microwave drying equipment

Microwave drying is a new type of drying method. When drying, the microwave energy directly acts on the medium molecules to convert into heat energy. Because the microwave has the penetrating property, the inside and outside of the medium are heated at the same time without heat conduction, so the heating speed is very fast. For food with water content below 30%, the drying speed can be shortened Hundreds of times. So what should we pay attention to when installing microwave drying equipment? Let's take a look at it together.

1. Before installing the dryer, you should determine the installation location of the dryer. The selection of the installation location of the dryer should consider the location of the transportation channel, raw material turnover, water, steam and sewer pipes.

2. Refer to the dryer manual, find the electrical control cabinet of the dryer according to the relevant content in the manual, and connect to the 380V three-phase power line and neutral line according to the marking on the terminal (it needs to be reminded here: the power consumption of the dryer needs to be 380V, it is forbidden to connect to low voltage or high voltage.).

3. The dryer is one of the larger and heavier laundry equipment, so the machine should be installed on a solid foundation, while maintaining a level to prevent the equipment from working due to improper site selection and uneven installation location. There is a large vibration, which affects the washing efficiency and the service life of the dryer.

4. Connect the water inlet pipe and steam pipe according to the label instructions on the dryer. If the steam condition is not available, the steam inlet can be blocked. If the steam heating function is used, please install the pressure indicator at the obvious place of the steam main pipe outside the machine Devices and safety devices.